Toxic truth? The cookware craze redefining ‘ceramic’ and ‘nontoxic’
Toxic truth? The cookware craze redefining ‘ceramic’ and ‘nontoxic’
... the pans are likely not “nontoxic” some independent testing and research suggests. Nor are they even “ceramic” – at least not in the way the public broadly thinks of ceramics. Now, regulators are investigating some of the pan sellers’ claims.
"The companies won’t tell the public what else is in the pans, and their formulas are shielded by confidential business information laws, making it very difficult to verify their claims."
I'd think the answer to this should be super simple... Investigators go to the factory and demand the Material Safety Data Sheets.
They don't have an MSDS? Shut that shit down.
Virtually all my cookware is enameled cast iron since I found the Le Creuset outlet store and 30% to 60% off deals. :) I do have a seasoned carbon steel wok and full ceramic bakeware though!
I also have a le creuset enameled cast iron, but for some reason I don't think I'm using it correctly. I find too often that food is sticking to it. I have tried lots of different things, but non seem to work. Honestly I think the only thing left to try is using a bigger stove maybe? But thats not so easy haha
But what are you doing, how are you using it?
It's a skill that takes practice and experience more than any golden tidbit of knowledge. Food is wide and varied, what works for one thing won't work for all.
There are lots of general pointers, use more oil or, make sure the pan is hot first etc etc.
One of the biggest misconceptions that people have from Teflon is food sticking and releasing and worrying about that. With Teflon, at least when it's good and new, nothing ever sticks, at any point, ever. This is not true of anything else. Your steak will stick, for a while, and then it will let go once the protein has cooked a bit. Your pancakes will need to cook for a while before you can get them to release from the pan etc.
Part of the skill is the implements you use and learning to release various foods from the surface. I like a wooden spatula for bulky things, but I also have a thin polyamide spatula for trickery stuff. The sharp edge on that helps a lot without damaging the pan. You can also use temperature changes to get food to release.
Lastly, sometimes some food sticks. Don't sweat it. It's still edible, don't let it ruin your meal and learn as you go.
I’m not the person you asked but using more fats can definitely help, because the pan is cast iron it gets very hot so watching the temperature of your pan should really help. Food that is wet from water, like rehydrated hash browns is one I’ve found that’s bad for this, will especially burn and stick. A little sticking of food is still to be expected if you are cooking foods that have a tendency to stick, it’s not a true “non stick pan” but it’s pretty close
They were also shitty pans. Just stick with cast iron or stainless steel.
I got a couple of carbon steel pans. The upkeep is similar to cast iron but much lighter / easier to handle. I reach for it 90% of the time.
Yeah I would get one if they didn't cost a million dollars and I didn't already have too many pans.
Bonus for carbon pans over stainless steel is that carbon pans hold their seasoning better than ss. You can't really keep ss pans seasoned. They have to be re-coated every time before using. Outside of "looking pretty" there's no reason to own ss pans over carbon. Cast iron stays seasoned best, of course, but they're heavy as shit.
I prefer cast aluminum cookware. Handles high-heat, can't rust, cleans super easily, and almost definitely accelerates my inevitable Alzheimer's.
All of this early research, led to suspicion that aluminium from various sources, such as cookware, foods, vaccines and even water, could be linked to Alzheimer’s. However, through continued investigation, research has disproved this early evidence, and aluminium hasn’t since been found to be a direct cause of Alzheimer’s disease.
-- https://www.alzheimersresearchuk.org/news/aluminium-and-alzheimers/
studies have failed to confirm any role for aluminum in causing Alzheimer’s. Almost all scientists today focus on other areas of research, and most experts believe aluminum does not pose any threat.
-- https://www.alz.org/alzheimers-dementia/what-is-alzheimers/causes-and-risk-factors
One of the reasons I moved away from cast aluminum is they can’t handle the heat. Over time they tended to warp pretty badly. I always cook at a fairly low setting so I don’t know if my ex was forgetting to turn off burners or something, but the pans warped.
But the major reason is I only see them with non-stick interior, which starts flaking off after ten years
I’m expecting my stainless and cast iron to be the last cookware I need to buy
#BuyItForLife
Does anyone have a source saying that ingesting cast iron seasoning (burnt fat) is ok?
I just want to make sure I’m not just picking my flavor of cancer. I assume burnt food is better than PFAS (not forever)
The seasoning on cast iron is polymerized oil and it's chemically bonded to the iron. You're only really going to be removing the seasoning if you're using abrasives or scrubbing too hard with steel wool or something like that.
https://www.seriouseats.com/the-truth-about-cast-iron#toc-myth-4-dont-scrub-with-soap
Any loose bits of black gunk that are coming off while you're cleaning it with a sponge or a scrubby are just burnt food.
Good luck finding an article on point for this sort of thing. I looked for a bit to try to find something to link here, but couldn't find anything that directly addressed cooking oil polymers. I just wanted to say that you won't necessarily be eating burnt fat. Seasoning cast iron/carbon steel isn't necessarily about burning fat onto the surface of the pan, since what you're trying to do is create a polymerized layer of cooking oil on the surface of the pan. Polymerization can occur well below the smoke point of an oil, you just apply heat to speed up the process. Applying too much heat can actually be counterproductive, since the polymer will carbonize, but you'll probably never reach this point unintentionally without leaving a pan on the burner unattended. Under normal cooking conditions, any heat degradation of the polymer layer will be made up for with the fresh cooking oil that you've used, refreshing the seasoning. If you're going to use cast iron or carbon steel, you should thoroughly clean any burnt on bits after cooking with dish soap. Modern dish soaps don't have lye, so you won't be doing any damage to the seasoning and you'll only be left with polymerized oil, not burnt fat.
If you do decide to do more research and find something on point, please do share! I wasn't able to find anything that explicitly pointed towards it being unhealthy, and I'm alright with making a somewhat informed assumption of the risk.
Just use stainless steel and carbon steel if you are worried about that, I honestly use my stainless pans 70% of the time, carbon steel like 20% and my cast iron is that last 10% when cast iron is actually beneficial
Huh, I’m opposite.
It's likely not ok. But focusing on every source of carcinogen in your life won't stop you from getting cancer eventually. Eating healthy and using Teflon pans will probably give you a better life than eating like shit on cast iron. No real way to know the future though.
Tritan is a good example of this hyper focus on not consuming bad stuff. It has 3 components, 2 of which imitate estrogen. It's the plastic that replaced polycarbonate. Which is derived from BPA, but in reality contains very little after you wash it once.
So... the crispy bits that result from the Maillard Reaction (the TASTY crispy bits!) may be a known problem because it produces acrylamide.
https://pubmed.ncbi.nlm.nih.gov/24875401/
"Based on the evidence of acrylamide carcinogenicity in animals, the International Agency for Research on Cancer has classified acrylamide as a group 2A carcinogen for humans."
Stainless steel and cast iron is the way
I've retired the last of the non-stick cookware I had. It's all iron, cast and stamped, and stainless now.
The reason I haven't bought an instant pot or airfryer is that I haven't found non plastic coated ones.
Finding a non teflon coated aluminium pot with a heat capturing coil for lightweight hiking is impossible last I looked.
Just removing teflon from stuff is a huge pain too, it's dangerous to burn it off, I might try and sand blast the Teflon off the one I have. I have to research how bad that is, probably makes way too much toxic microparticles. But it really shouldn't be so hard to find food appliances and cookware not coated in this crap.
I went through that recently with air fryers. There's a few out there.
I don't know how people can stand cast iron pans. I know they're supposed to be great for cooking but I always feel like you can never really get them all the way clean.
Clean is a misnomer. We're covered in bacteria and filled with bacteria. The air around us is thick with yeast. The second you wash any pan it is immediately reinnoculated with stuff around it. If you throw the concepts of brewing and canning at clean and you'll find that nothing that we have is clean.
The bar for cookware is safe and doesn't impart bad flavors to the food.
But this isn't to say that you should or have to use it, But you ask why the rest of us do, It's because it's as clean as is necessary to cook great safe food.
You only need 4 kinds of pans
Just use stainless steel and learn how to cook your food
Learning when the pan is hot enough more Like, but yes.
Sainless is non stick when its ripping hot
sooooo... is my Stanley Tucci Greenpan pan gonna kill me? article didn't divulge the saucy details
Enamelware chads stay winning
I had a blue diamond frying pan that claimed to be non-stick and much tougher than teflon. It claimed to have a "ceramic" coating, but I looked into it and it was just some kind of resin. Stuff stuck to it and it chipped and peeled just like teflon. It might have been a little tougher, but you sure as hell couldn't use stainless steel utensils on it like it claimed on the packaging.
The only cookware I'll use from now on is stainless steel or triply. Easy to clean, can use any utensils on it, and it's non-stick enough if you grease it. Plus you can cook at any temperature! Which is the whole point of a frying pan!
How did teflon frying pans even come into existence in the first place? Frying is done at high temperature, and teflon peels at high temperature! It defeats the entire purpose! Every teflon pan I've ever used has peeled and left awful cancer-causing debris in my food. Every other person I've ever seen using a teflon pan has had the same problem. It's like big cancer has a monopoly on teflon pans and has brainwashed the public into wanting to buy the damn things.
Just a random point: the actual coating (teflon) is completely non-toxic. The manufacturing process of teflon is the cause of a large amount of PFOAs in nature/food chain. The pan has no PFOAs most likely after the first cooking session, or likely before (unless the factory just completely brazenly does not even wash it once)
The peeling teflon is inert and way too big to be absorbed your body. It just passes through without causing harm, cancer or otherwise.
Teflon has it's uses for some dishes like fish and omelettes, but it's true that they are essentially disposable trash.
The problem will go away when the current administration further cuts consumer protections and health oversight.
Sooo… this is as close to a product recommendation as you can get on The Guardian without reverting to ads.
The Xtrema ceramic pans seem really enticing.
The only three kinds of metal pots, pans, and skillets that will ever enter my kitchen: Cast Iron, Carbon Steel, and Stainless Steel. And pure too, not clad or coated in anything, not finished with anything other than a basic seed oil seasoning.
Hexclad just sent us their sign up for their class action lawsuit. Yeah it was PTFE all along. And when you rub PTFE and any kind of spatula, you're getting PTFE in your food.
Really need regulatory action on this. People have no idea.
You won't be seeing this in the US, EVER. Too much money in politics
While the current regulatory environment is very...discouraging, it's not impossible, particularly if individual states take action.