papalonian @ papalonian @lemmy.world

Posts

19

Comments

1,130

Joined

2 yr. ago

You are! The people that make you feel you aren't, aren't worth your time 😉

Sounds like a plan!

If you have the time, check out a "intro to Klipper" video or something similar, just to get an idea of how useable it is, see if you're interested. I'm here if you have any questions 👍🏽

Is there any advantage to going the klipper route?

The advantages are innumerable of you are a tinkerer (it looks like you are). If you just want your printer to print stuff and that's that, marlin is fine, but if you want to get serious about tuning and modifying your printer, Klipper is an inevitability.

Think about the QOL improvement that octoprint provided over running your SD card back and forth from PC to printer. Klipper is that x1000. Write macros to automate things like filament swaps, chamber heating, build plate clearing. Change every aspect of any behavior of the printer by modifying a .cfg file (rather than recompiling marlin firmware.bin files). There's plugins for Cura to send your g-code directly to the printer (with octoprint you save the file to your PC then upload to octo, with Klipper there's just a button in Cura to send directly to the printer and start printing).

In short, the only reason to use marlin is "it came on the printer and I don't have the knowledge to set up Klipper". Klipper is just better in every way. It'll take you a couple hours to set up (you have a popular with lots of premade configurations available online), and from the moment you get it going, you'll wonder what took you so long.

PM me if you have any questions.

I know this is a couple days old, but I have a heavily modified Neptune 3 (non pro) and it needed the bed springs that replaced the plastic spacers. It was very uneven within a month or two of owning it and was constantly shifting.

Bought a pack of springs for maybe 10 bucks on Amazon and, while not as permanent as solid metal spacers and maybe loctite, it lasts much longer than the plastic spacers between needing a relevel, and being able to fine tune it with a screwdriver is a must.

Wish he would've been around to see the things the average joe can make in the garage today. I'm glad that you've got fond memories of him though.

My grandfather would probably use one to print out a similarly endless supply of things for us grandchildren, though if I taught him the basics of something like tinkercad or fusion360, the next time I visited there would be all sorts of printed brackets holding everything in place.

Hey, he got to see the invention of plastic. Obviously we're dealing with the repercussions of it now, but imagine what that must've done to the hobby industry.

this entirely. It's awesome and frustrating haha. My Neptune 3 from 2022, that I've poured hundreds of dollars and hours into, is completely outclassed by an out-of-the-box printer of the same or lower price today.

I'm really happy that it's getting so approachable now, I hope that I can get my grandfather his own printer during his time. I love that you don't need to be an engineer anymore to get the things to work.

I don't think that Cura is smart enough to cut STL files apart like that. My guess is that a program like blender would be best to do this, make a shape the size of your printer's build volume (or slightly smaller), put the part you want to print inside of the shape, then remove everything else.

I'm not familiar with blender but that's the work flow I would approach with.

I see, I missed that tidbit of the conversation. My bad.

I don't see myself caring if Hasbro tries to require a "subscription". Like I said, none of the gaming I've done with DND has been through any legitimate channels they offer, I've got the PHB and DM guide on my phone and all the games I've played are either homebrew or stolen PDFs that work exactly the same way a "subscription" would.

I have been interested in checking out Pathfinder, but honestly don't care enough to push my friend group towards it. If anyone approaches me with a PF game I'll join, but not going out of my way to find one.

so I would hope that they would want to switch just to get away from Hasbro.

I'll say this as a relatively newer player, I don't care about the company that made the game when I'm trying to find something to play. As a player in 2 campaigns and a baby-DM for another, I think the only money I've paid that hasbro would get anything from is a Nolzurs mini I bought before I started making my own.

I'm not saying that people shouldn't look outside of DND for other RPGs, there's a ton of other great platforms out there, just trying to offer some perspective. I don't think the average DnD player really gives a crap about Hasbro (again, not saying they shouldn't care, just that they don't), let alone have a desire to change platforms based on the manufacturer.

How have I never noticed that these goobers don't have arms or nothin. I can't imagine this thing walking in any way other than a swiggity swooty approach.

This is God's creature right here.

I really like it when streaming series have different length episodes so that they can be the length needed to tell that part of the story!

I agree wholeheartedly and I think it's something tv producers are afraid to do or think people don't like it. Maybe it's just a relic from cable TV with set time slots. But no, you don't need to make that transition 30 seconds longer or add 2 minutes of scenery in between every shot just to stretch it to whatever minute-mark you're trying to accomplish. Same thing with cutting or rushing things; if I'm 4 seasons into your show, I like it enough to set aside an extra 15 minutes of my time to watch an episode that is properly paced and fleshed out, vs two that you chopped into awkward, rushed, flat 30 minute chunks.

Stories are not uniform! Our story telling mediums shouldn't be either. Can you imagine if James Cameron tried making Lord of the Rings in 90 minute segments?

I see, I did not realize the range of different resin materials. I was led to believe most behave pretty similarly.

I've never had the privilege of paying a CMON game, but the sets I've seen in stores seem so enticing.

I hope you find a resin that is both affordable and meets your needs! Eventually I'll probably want something more bendy too, once I get better at painting I probably won't want my guys to break.

I've only been printing for a short time, so sorry if I seen ignorant. But I'm assuming you aren't a fan of the ABS-like resins? Minis are the bulk of what I've printed so far, I've done them all in Anycubic grey abs like. A handful of them have taken a topple off the printer shelf (~6 feet / 2m) and so far the only things that have broken are things I don't think a different material would have stood up to anyways (read: large objects attached with a tiny surface area, warhammer heads, a hand holding a glass orb, I think one cloaked arm). Everything has super-glued back together very easily (though they're all still unpainted, if they'd been painted the seam would likely be much more visible).

I had a small model (not quite mini sized) printed in standard resin that fell from a much shorter distance and broke in like 3 places so it's definitely more flexible/ durable than that.

It's also like $15 USD/L...

Mono 6k's

Yup, that's my exact printer. Haha.

+8k resin is almost always marketing wank.

Yeah, that's why I figured a company that is willing to make up mostly BS to sell their stuff would jump at the opportunity to advertise an actual perk (lower lift height).

Yes, having a system where the manufacturer recommended settings actually work and work well is wild coming from FDM printing. With filament they're like "uh print somewhere around this temp I guess 👍🏽" what retraction settings? How fast can I print? Flow %? Granted this all varies dramatically from printer to printer so I know why they don't try to give a profile, but it's so nice that resin printing you've got a perfectly working baseline that you only really need to fine tune if you want.

It's odd then that this seems to be the case for all the resins I've tried (granted, they're all from anycubic, just different types).

You'd think that the companies advertising "8k resin" would try to shill their product as "low lift, faster prints" or something.

This is coming from a big 3d printing nerd, but no, the average person is not able to reuse filament once it's been used. There are commerically available machines made for turning bits of filament into reusable filament, but the process is incredibly difficult to manage on a hobby scale (you need to make sure your scrap is completely free of any debris or your filament will cause nonstop jams and clogs), the machines are very expensive, and you need a ton of scrap to get a usable amount of filament. I think that there are companies that offer recycling as a service, but again I can't imagine it being viable on a hobbyist level.

I recognize that plastic waste is obviously a huge issue when it comes to 3d printing, and I agree that some aspects of the hobby can be deemed wasteful. One thing I think that is often overlooked though when it comes to this discussion is the reduction in shipping and handling waste 3d printing provides. Sure, I don't really need that stupid Baby Yoda print, but if I was already going to buy a little figurine or plushy or whatever, at least the one I printed doesn't come sealed between two pieces of form fit plastic, held together by plastic coated twist ties, all presented in a plastic-cardboard box with a see-through plastic window that was shipped from mainland China - all of which is getting tossed out. The total waste produced for printing the thing is measured solely in the amount of filament I used and the electricity used to keep the printer running; when you consider that most people print in PLA (which is supposed to be biodegradable) and have electricity subsidized in some shape or form through renewables, the hobby seems much less wasteful than the more popular form of consumerism (buying shit).

The Haunting of Hill House is a phenomenal show. Incredibly creepy, and one of the most emotionally powerful things I've ever watched.

Thank you for providing the closed captions

I'd argue that snuggling doesn't require a blanket specifically, however some form of snuggling medium is required.

For instance, one can be snuggled up in a cushy comfy couch, a child can be snuggled up in it's mother's arms, a cat may snuggle in your lap or under your sweater.