If I use winrar to compress 80gb of tv and movies. Then can I compress it further by making it an iso?

No, movies and music files are already compressed, so compressing them further won't gain anything. In fact it will actually increase the file size because compressed files require some overhead. So even winrar won't help, though it might be convenient to have one big file with everything in it (you can even break it up into multiple part files.)

just throw away every second frame. repeat for more compression. at some point you ll be left with a couple of pictures to remember the story and replay it faithfully in your head.

you welcome !

As most have said, doubling up compression won't usually get you much.

However, video compression is usually designed to facilitate performance of sequential reads because videos are typically played beginning to end, so theoretically there may be ways to compress them more if you're willing to make sacrifices there.

I doubt RAR is the way to do it, though. It just hasn't been designed for this kind of data.

Maybe there's a video compression format out there designed specifically for archival storage, but I'm not aware of it.

ISO won't get you any further compression, that's for sure.

You could certainly test this out yourself and let us know if you get any space savings.

If I use winrar to compress 80gb of tv and movies.

You haven't gained anything by doing so since video is already compressed. Compressing data that is already compressed will usually make it slightly larger - or if you're lucky maybe you'll save like 1 megabyte space, not really anything worth the trouble.

Then can I compress it further by making it an iso?

ISO is not compression.

Iso is a container format; it’s a 1:1 mapping to how the bits are stored on disk with a header at the start describing the structure. Bin/cue separates the header into a separate file and can include data structured in ways that don’t comply with the ISO-9660 standard.

WinRAR is a compression/decompression program. It supports multiple archive types and compression formats.

Depending on the type of data you are compressing and whether you want lossless or lossy compression, you’ll want to select a different compression algorithm.

Depending on how you plan to use the files, you’ll want to use a different archive format.

Assuming you use the rar archive format, you still have a lot of options to consider. Should the data be encrypted or not? Should the directory structure be encrypted or not? Do you want parity files and segmented archives, so that if one of the parts gets corrupted (or goes missing), you can still extract the original data in a lossless way?

Beyond all that and selecting the compression algorithm that best compresses the type of structured data you’re storing, the general rule is that if you’ve got lots of data, using the largest dictionary and the largest compression window you can will result in the best compression.

So the dictionary is essentially a code book that says “when I see data x, represent it with data y in the file”. The compression window is how much of your original data is loaded into memory at any given time for the dictionary to look at and compress.

[edit] if you’ve got video, the best compression format commonly available today is H.265. This is a lossy compression format, meaning you’ll never be able to precisely recreate the original file. But it’s close enough not to matter at the right compression settings.

And if you’re using H.265, the best container format to stick it in is an MPEG-4 archive (typically with a .mp4 extension).

The result is a highly compressed and structured file. Loading chunks into memory for rar compression will usually result in a larger file, because the data is already compressed in a structured manner that a general compression algorithm can’t match… meaning that you’d get the input of xxxxx resulting in output of yyyyyy.

If you can sacrifice quality, you can encode the videos at a lower bitrate, but that is lossy compression, not lossless. Also, if your videos are in h.264 codec, then transcoding them to h.265 and preserving the quality may be a way to get the files smaller. You would use a tool meant for video, like Handbrake for this, and not winrar or other generic compression tool.

If you want to compress video files, you'll need to reencode them. Maybe using something like HEVC (High Efficiency Video Codec). But for 80GB of videos, you'll be there for a while and probably won't shrink them enough to be worth it. It would likely take less time to simply re-download the files later, even with a mediocre internet connection. In practical terms, you won't get that 80GB to be any smaller.

ISOs don't compress anything, as far as I know, or at least not by default. I think they're basically just a container.

To reencode your videos, you can use the free HandBrake.

No. And that's a bad plan. Uncompressed them, and then reencode them to h256/x265 with handbrake (use the SuperHQ 1080p setting). That's as compressed as they'll get and you can still watch them without having to unzip them first

well you can't compress anything by making it into an iso. Because iso does exactly zero compression whatsoever.

To answer the specific question (and im rusty on winrar but familiar with 7zip), you should be able to change flags for compression ratio and dictionary size.

When a file is compressed using a general purpose compression algorithm it looks for long repeating patterns and substitutes it for a smaller 'code' , it builds a dictionary of these codes which is stored in the file so the decompression algorithm knows how to expand it.

Take Morse code for example, E is represented by a single dot while Z is dash dash dot dot and as E is used a lot more frequently in the language. And if we only used the 26 letters, we could compress sentences down to a compact binary code of 1's and 0's with dashes as 1's and 0's as dots.

Others have said that handbrake is a good tool and i recommend it too. and as i dont know you use case, im assuming you might want to transfer all these from one computer to another. I believe you could use winrar to make volumes up at 4.7gig (or 25gig) and burn a series of DVDs (or blu-rays) with each disc being full, however if one of the discs gets scratched, corrupted (say disc 12 of 20) then all following data might also get corrupted.

Im going to assume that you've got these from a recording of a set-top box from a playback transfer of a VHS on its last legs and you're digitising an old family home movies.

Lets also assume the video was also recorded at full HD, 1080p (ie. 1920x1080 pixels. The video stream is going to show 2,073,600 pixels every frame), and it also recorded the audio as stereo and the box had an encode rate of 25,000kbps (kilobits per second. This figure is used as an example and may be way off reality bitrates).

So every minute of video might equate to 5megabytes of file size (again picking numbers as guesses).

Handbrake can help make this smaller.

You can do this by shrinking the pixels to be displayed. you could downscale the video to 720p (1280x720 pixels. So 921,600 pixels for every frame) and if everything else was kept the same, the files could be nearly halved but you lose out on some of the fine detail.

You could take this even further by compressing down to something like 360 pixels high and that would be ok to watch on a mobile device, but you'd notice the lack of detail on a 4k monitor.

You could keep the resolution the same at 1080p, and get handbrake to compress it further by lowering the bitrate from 25,000kbps to say 8,000kbps, this would affect the image quality, but handbrake does a good job unless you go for a really small bitrate.

Say my video was of a sunset and the camera doesnt move, the pixels displaying the building in the foreground arent going to change colour often so its compression algorithm adapts. Lets say a bird flies across the screen, so the pixels do change, but there might be a bit of blur around the bird as it flies and with more compression this could be more noticable.

One thing handbrake can do that the Set top box couldnt is look ahead with multipass encoding, so it 'watches' the movie and takes notes of when there are large changes in the image and can use more bits in the file on the segments of change, for example you watch a tv show and it cuts from a indoor scene to outdoors, this change would use a lot of data, but once it shows the first frame, it can switch to just changing a few pixels each frame.

You could also adjust the framerate of the video if it was recorded in 60 frames per second to 30.

You can also adjust the audio recorded by lowering its bitrate, and also merging the audio tracks from stereo to mono, but compared to video compression, this isnt significant.

Without knowing your usecase, id suggest something like a compression down to a 480pixel or 360 pixel resolution and lowered bitrate as a way to burn a low resolution copy of the movies that could be stored offsite as cheap way to have a backup of last resort.

Edit: in summary, try handbrake, use two pass encoding and just adjust the bitrate first and see if the quality is still 'good enough', and if you need smaller files, then try and change the resolution, the frame rate, and audio encoding.

I hope it helps,

Just buy another hard drive, damn.

The short answer is no.

You can do an easy experiment to see this using image files. Grab a random JPG file and open it in a graphics program and save it as a BMP format image.

JPG is already compressed, and BMP is absolutely not compressed. Then try compressing each image. You’ll find that the JPG doesn’t get much smaller, or might even be a bit bigger when compressed. Now do the same with the BMP - that one makes for a smaller RAR!

The main issue here is that compression is about removing empty space in a file (it’s a weak analogy but bear with me). If the file itself already had some kind of compression (basically every AVI or MP4 or MKV you download probably is already compressed), then there’s already a lot less empty space inside the file. RAR doesn’t have much empty space left to work with, so it can’t really reduce the file size any more.

It’s worth doing some testing on a single movie to see how this all works. You’ll probably find that it’s best to just leave the files exactly the way they are. No RAR. No ISO. No tricks. The gains simply aren’t there.

If you’re looking to save on some disk space with your movies, you’d get a lot farther by just deleting one movie you don’t really want that badly. The amount of space you get back from that will exceed your compression gains. It also means you don’t have to go and uncompressed the movies every time you want to watch one.

Bottom line, winrar isn't the tool to compress video files. In short it's more complex, but zipping, raring etc... those methods are all the ideal way to compress executables, word documents etc... In short, most likely your video files are already compressed as much as they can be without loss of quality. However if you were to attempt to make them smaller, most likely you'd use something like handbrake or some other video codec converter to actually try to shrink them.

Put the data inside a mini-blackhole and activate Future Gadget #8 PhoneWave (name subject to change)

Wow, this is a very technical question. Judging by the "does my doggy understand his birthday?" post, I thought you were a r*tared 10-year-old.