wjrii @ wjrii @lemmy.world

Posts

54

Comments

1,509

Joined

1 yr. ago

I know they don’t mind “dramatic iteration” in testing, but aren’t the tests supposed to get better as time goes on?

This one didn’t dump debris across Caribbean islands though, so I guess there’s that.

Okay… maybe one king…

When the lie is so big that even Bondi won't tell it, you have to bust out ol Don Junior. What a bunch of assholes.

Sorry, but those are clearly moth eggs.

Ahh, yeah, I stand corrected. Sleeves were gone from the Thinkpads earlier than I thought.

American here. Assuming we muddle through the next 3.5 years (a fairly big assumption, I admit), I think things will get better, but in a qualified way. The tension will dip and you can even make short term changes that will be welcome to everybody like easing border restrictions and increasing communication and cooperation, but it's going to take literally generations of non-crazy American administrations to rebuild the trust to where it was, and that's 100% fair.

Large infrastructure projects are going to get delayed or shelved, treaties will not be negotiated, money will be spent on duplicating efforts because the US may be a better or worse partner in future administrations, so we're no longer a reliable partner in any way. All because half the country thinks you should never have to deal with anything you don't immediately understand and approve of, and anything that's mildly unpleasant in your life is the fault of people who don't look or speak or pray like you.

This is a good suggestion. That generation of ThinkPad keyboards wasn’t the No-travel scissor switch nonsense that most laptop keyboards now anyway. It was IBM buckling sleeve technology, and a low profile tactile switch with similarly low-pro keys would probably be about the closest thing to its feel.

Stick to football, bro.

Having seen Tuberville as a college football coach, that’s a hard no. Tommy is an idiot and an asshole.

For the very basics of KiCAD, their own intro is helpful. I had to wrap my head around the workflow: first schematic, then PCB.

Once you grasp that, some keyboard specific stuff is described by Joe Scotto in this video. He tends to rush his tutorials though, so best to go through the KiCad page first or revisit the video after.

For resources, I found Ai03's library of footprints to be perfect, except that his vertical 2U were not oriented how I needed them, which I realized too late, LOL. Then, the kbplacer plugin by adamws was absolutely invaluable and saved me so much time. I used JLCPCB, because even when US-China tariffs were at their worst (and goodness knows they could be again if Trump gets a hangnail or something), JLC was still the cheapest option for me.

If you've never done a PCB before, I might humbly suggest keeping to a fixed layout for the first go-round. I did that on my first board and it worked perfectly for what I intended it to be. I got a little ambitious with this one, and ambition+inexperience+impatience led to a flawed project.

SKCM white. Both switches and keycaps (and the front feet, actually) came from a fried early-90s Focus keyboard that had a trackball where the arrow keys go, and the arrows were around it on mouse micro switches with little flappy “buttons” that are part of the case, also very mouse-like.

For the PCB, lots of YouTube and searching Geekhack, deskthority, and (yes) Reddit to see how to use KiCAD for mechanical keyboards. Mine uses the “cheat” of mounting a Raspberry Pi Pico clone to the underside so I don’t have to know as much about electronics (that part actually went perfectly).

The mistakes were two tiny bits of trace that got deleted but I didn’t see, and some placement issues for the Alps version that I had to work around. I have four of them left, so I’ll just use MX compatible switches and a normal sized spacebar for future builds and avoid the worst of it.

How about the cop who decided to pop a (right leaning apparently!) Australian reporter from close range with a rubber bullet, just for shits and giggles?

I've never played crokinole, but I made a carrom board (mentioned in the article) years ago and it's a lot of fun. Mine was not from very good plywood, so it needed extra starch, but while messy, I could get (what the internet said was) an acceptable number of rebounds. We still have it, but its last use was to hold a partially completed Harry Potter jigsaw puzzle whose many dark areas stubbornly outlasted my daughter's interest in the franchise. Given ol' Jo's proclivities, that's just as well, though there's still a few wand and such floating around, a few of which I made on my lathe.

No! Not Jordan Catalano!

Actually, totally yes. Leto is a walking hollywood predator cliche.

The part where the baby shoves their hand in your face when you can’t do anything about it is actually pretty accurate. The face you then make as the grown-up is also spot on.

Thanks! I am going to keep those all in my back pocket for when the honeymoon of not having a $99 "box o' parts" Voxelab wears off, though I feel a little guilty for never installing that BLTouch clone now.

I haven't printed much with the Sovol yet. So far, the main things I'm running into are bed adhesion (the old standby of a washable glue stick is helping), and I've had a couple of vertically oriented parts get knocked off the bed, and slowing down quite a bit helped.

I know the beds are worse, apparently almost all of them. Sovol chose to change the Voron reference design to be cheaper and it’s just not held down right, so they exhibit varying degrees of “taco” inconsistency that the diagram accentuates visually. Mine has a corner that seems to be about 0.4mm too high, and the rest is a bit wavy to lesser amounts. This is the main reason I set it to redo its z offsets before every print.

The Sovol doesn’t use standard extrusion profiles so it’s less moddable, its hot end is not completely standard, and it uses injection molded parts in places the Voron uses 3d printed parts (that last may be be an advantage, lol). The Sovol also doesn’t run a completely clean version of Klipper. I think it’s set in a way to make it work a little better with their cheaper BOM.

It’s big and fast and Voron-like, but it’s just not a hand crafted super printer like a Voron can be.

I just got a Sovol SV08, which is like a Voron but changed up a bit so the teacher doesn't get mad... and to be cheaper :-)

I'm just coming in from an Ender3 clone, but overall, other than the potential of taco bed messing up some prints, I've been really pleased with it. I'm still fine tuning what it likes to do, including slowing it down on some small vertical prints, letting the bed "heat soak" for a while to even out, and running the Z Offset calibration on every print, but Core XY, auto leveling, and all the other little QoL advantages are nice, and I've already used the big bed to print stuff that wouldn't fit on a "normal" bed.

For your specific printer, Vorons are generally even more kit built than most printers, sometimes even completely assembled from a BOM by the builder/user. If they did it well, and if it loks to be in good shape, it should be an excellent and well supported printer. I paid USD490 for "We have Voron at home" and I feel like it was a good deal. I'm not super well versed in pricing in Europe, but EUR770 seems like a good deal on a kit, a REALLY good deal on a new 350mm, and a very solid one for a used printer in good shape.

Now, all that said, I am super glad that I kinda had some experience with more primitive printers before I got the Sovol. I'm less panicky about little inconveniences and realities of printing (especially on a budget), and I feel like I at some high level understand how it's all supposed to be working and that I can look up how to fix things and implement what I learn. If you don't want to deal with any of that, a Bambu, even with its potential walled garden "sword of Damocles", might be a simpler idea.I understand they really are just super easy to live with.

Don Perlin on pencils. I originally thought John Romita Sr, but yeah, that jawline is a bit too dashing.

I just wiped Bazzite in favor of Tuxedo OS. I liked Bazzite a lot until I wanted to do the faintest wisp of development (setting up a new DIY keyboard with QMK). At that point I realized I’m in a very specific doughnut hole where I will occasionally want to do things that are still not mindlessly simple on an immutable distro, but I’m still untutored enough to need the walkthroughs that never include how to properly layer or sandbox stuff without just fucking up the very immutability that made it a good idea in the first place.

Shame though, as it was dead easy to install and use for basic productivity and especially games. A person with different needs and/or more skill would do very well with it. In the meantime, Tuxedo seems like a good snap-free Kubuntu alternative, and I’ve been floating around in KDE-running Debian derivatives (off and on) for decades.