Good chair. I'm still using a refurb V1 that was surplus from an office supply place 6 years ago I think it was maybe $200 or $300. I replaced the original armrests 3 years ago for under 40 bucks, and I'm on my second replacement $20 cylinder. Everything else has been perfect. I harvested a HM Mirra 1 for free when our office's lease was up (tried to grab an Aeron, but they said only the Mirras were for the taking), and my wife has a Steelcase Gesture, but I think I like the leap better than any of them.
I normally use that same coffee in an Ikea French Press and while I won't say it's gourmet, it meets my needs for "not particularly bitter caffeine juice". Honestly, I slowed it down the next time I did a single cup pourover and that took most of the battery acid notes out of it.
I don't have a particularly sophisticated palate and still want some sugar and milk in there; I just don't like Starbucks very much and hate paying a premium for a product that I like less than my homemade half-assery. :-)
Yeah, Blender has two major limitations for mechanical-type parts:
One, it's not parametric even with its CAD plugins, but whatever. If you're only designing one part or a small assembly, you can manage without parameters, and the basic act of "make something" is often easier and more intuitive with a direct modeler.
Second, it's editing meshes only. For 3D printing, that's not really the end of the world, as Slicers only work with meshes anyway, but as you say it limits resolution and accuracy, and could mean you have a bad time if you wanted to get a better printer or leverage some other form of manufacturing. It's not a perfect analogy, but it's kind of like using Photoshop and only saving in JPG.
If you need drinkable brewed coffee from SB, you have to order the blonde roast. They scorch the everliving fuck out of their regular stuff to ensure consistency regardless of source, so even if you normally don't, if you want "black" coffee from SB, you'll be better off with the blonde. If you're brewing by volume of grounds, lighter roast will have more caffeine anyway (they're the same if you brew by weight).
So it's not a lawsuit (yet), it's a complaint to the state attorney general of Washington accusing Starbucks of unfriendly consumer practices related to their gift cards, in part because they can recognize unspent gift cards as revenue, and also because it's instant cashflow for them even if the accounting revenue lags behind. The need to come up with a calculation for how much deferred revenue to recognize can be abused by execs to nudge the revenue higher (and with no additional costs associated with it, profit as well) and thereby improve stock price and trigger bonuses and whatnot.
The actual complaint reads as a bit of pearl-clutching ("involuntary subscription" because customers don't want to leave a balance OR talk to a real human at their local Starbucks!) , but on a the "death by a thousand cuts" model, yeah, I suppose Starbucks is being kinda dickish. The app doesn't give you as many rewards if you pay with CC, buries the other payment options a couple of layers deep in a menu, doesn't let you reload gift cards in increments equal to a purchase, doesn't let you split payment methods, and sets a high default reload so (on iOS at least) it isn't immediately visible that you even could scroll up to reload in smaller amounts.
It's sort of garden variety asshole app design meant to soft-lock customers in, but it's not really fraud in any meaningful way if someone is motivated. You add money, you get bitter overpriced coffee that your partner really likes for some reason. I prefer CHEAP, ACIDIC coffee because I did the pourover too fast on mediocre store-bought grounds that are too fine, LOL. Still, maybe worth a public scolding or some fines to get them to modify it so people can save a few bucks without diving into the finer nuances of their coffee app.
So, in the linked complaint (not a full lawsuit yet, btw), they cite "breakage" where Starbucks corporate makes an estimate each year as to the amount of banked gift cards they reasonably believe will never be spent. It looks like it has averaged about $185M in the last few years. This can be moved from deferred revenue to actual, and thereby improve the financials. This could theoretically be fucked with on the margins and allow execs to pocket more money, and to some extent it obviously encourages Starbucks to promote gift cards (in the broad sense) over other payment methods.
The whole complaint is odd. Starbucks obviously feels like they have a winner in this scheme, and almost everything alleged in the complaint is kinda fucky, to the point that I think it's worth pointing out as a consumer protection issue. That said, the individual impact on any one consumer is very small and there are numerous workarounds for a slightly motivated person, and the tone of the complaint comes off kinda like pearl-clutching and paternalistic. Maybe you have to write it that way to make sure it's taken seriously, but it's not making for very persuasive reading.
Same plate, but 3D printed sides and springs as flexible supports for the middle
Custom no-stabilizers mini-1800 style build with DIY laser dye-subbed keycaps. Plates and sides are home-lasered hardboard. feet and port cover are 3D printed.
Next project is using the last of the three TKL plates with a spray-painted, 3D-printed case.
I thought Jupiter Ascending was kinda half decent, though super uneven and sometimes distractingly bonkers. I thought Valerian had its moments and different casting could have made it into something. I even liked "65" once I realized it was just a small-scale rumination on fatherhood and loss, an acting exercise that happened to have dinosaurs and a light glaze of bad sci-fi.
So a while back I wanted to make a keyboard with a slightly custom layout, somewhere between the Happy Hacker keyboard and the NCR80 kit. I sent out the files to be farmed out by Xometry, and it was pretty cheap to bump it up from 1 set (top and bottom) to three. I've actually been using number 1 as my daily driver, with just some sticks of oiled red oak as the spacers between the aluminum. Number 2 had 3D printed left and right spacers, with some springs for the middle.
Now for number three I actually designed and printed a "proper" case. In the pic you can see where there's some glue drying because I overestimated the tolerances on my Ender3 clone, but it split along the layer lines so some super glue, sandpaper, and a coat of spray paint (I'm going to go with "Bauhaus Yellow") should fix it right up.
The top plate slides into a groove in the case (which needed to be looser, hence the repair job). The bottom plate goes into a rabbet in the bottom. There are slots for captive nuts so the screws won't show through the top. I also printed some wedge-shaped feet that run the front-to-back length of the bottom plate and give it about a 6-degree incline.
The design is pretty run of the mill, but it the direct inspiration was the keyboard for the Atari XE Game System, which was my first proper computer, even if I didn't have a disk drive.
My office has a "workshop" side with three cube-farm desktops salvaged from an office park refurb. Under those, I have 4 cheap drawer units and one matching shelf unit. For now, the boards themselves are on the shelves, and keyboard stuff occupies three drawers. Keycaps stay in their boxes, extras are married into the "nicer" boxes, and it's all labeled on masking tape. Switches go into old coffee jars that hold 50 switches very easily, also labeled. Empty Keyboard boxes get stashed in one of the less accessible drawers. Keyboards share space with 3D printing, soldering/electronics, office supplies, and my "inside" tools.
Agreed, and I'm not sure it was EVER used that way. I've only ever seen it written, and in places where someone wanted to distinguish it from the other codes without giving the impression they were excluding Canadian football. It's a useful term in the right context, but it's not "the full name". Contrast to soccer, where many teams have "Association Football Club" right there in their names as "AFC."
This is actually a pretty big assumption for some of the more outlandish claims. When you dig in a bit, you find many of them are kind of repetitive tropes and generally come from Senatorial-class writers about emperors whose policies were less friendly to that class.
Not to say they couldn't have happened, and even in those days better to exaggerate than to invent from whole cloth, but it seems like an unusually large number of "bad" emperors had the same kinks as each other or the same traits that the literature had always considered "unmanly."
Per the article, the strike certainly seems to be dramatically affecting the trains, but once people get their cars off the train or ferry, there are long waits for border controls, which of course the British could have avoided altogether by not doing something as stupid as Brexit.
It would require more research than I'm willing to do, but the only part of that article that set off my sports-history-nerd Spidey Sense was this:
In full, it was known as gridiron football, but most people never bothered with the first word.
I don't know that anyone actually involved in playing or codifying the game ever used "gridiron football" in anything like the same official way that Association football or Rugby football were used. It feels much more like outside observers trying to impose logical categories from afar, British exceptionalism at its finest. AFAIK, gridiron was always used as a nickname for the field, and the sport itself was only ever widely referred to as "football," American exceptionalism at its finest.
For a while, the governing body in the US was the United State Soccer Football Association, so you're good, and it's also some good trolling of the zealots on either side of the "debate."
This. 'Soccer' is well understood and unambiguous, though it might prompt certain assumptions depending on your audience. There are times and places you might prefer to say 'football' to mean 'Association football,' but if you just need to communicate simple factual information in two syllables, it's probably the best word for that.
wjrii @ wjrii @kbin.social Posts 22Comments 514Joined 2 yr. ago 
More pics at geekhack, including its older siblings, which also have some 3D-printed parts, though nothing like this one.