Never tried sharpening them myself, always used a service as standard jobber bits are less than a pound to get done for you. I normally save up a bunch of stuff including saw blades and get them done at once to save on shipping at hit the low volume discounts.
However, its only worth doing on quality components, I wouldn't pay a pound or waste my own time to get a cheap ass drill bit sharpened, I would just replace it.
My saw blades start at like £70 so paying £12 to get it sharpened is good value, but a £30 blade is not really worth it, not least for which it won't cut anywhere near as much material before getting blunt between sharpens. Same logic for drill bills, some of my SDS ones are over £30 each, my augur bits can be over £50 each, so those are worth looking after, not going to bother for a set of 10 bits for £20.
But don't cheap out on drill bits, nor should you try and use the same drill bit for like a decade without sharpening it.
Think of drill bits like a good, sharp knife. Knives cut far better and far easier when they sharp, exactly the same with drill bits. If you trying to cut something you would normally pick the right type of knife to do the job, exactly the same with drill bits.
If you driving screws or other fasteners with your drill consider better quality driver bits if you have a lot of them to drive, such as building a deck. Good quality driver bits cam out far far less and will take more torque so be faster/go in better. Using cheap driver bits is probably worse than using cheap drill bits.
If he hadn't pitted but Lando did, highly likely Lando catches and overtakes him. Also, there is a good chance that Charles would have pitted a second time then overtook him as well. The tyre delta for both mclarens at the end to charles was huge, and the ferrari was kinder to its tyres than the mclaren.
I use powershell for work as I need the m365 modules for work and its very flexible with decent module availability to plug in all sorts.
However it absolutely sucks for large data handling, anything over 10k rows is just horrendous, I typically work with a few million rows. You can make it work with using .Net to process it within your script but its something to be aware of. Being able to extend with .Net can be extremely useful.
I was under the impression that ios used sleight of hand with apps to reduce memory footprint for inactive apps rather than how android manages its recent apps list? Is it still requiring special permissions to run non apple apps in the background as active tasks? AI will need to run the background and will need a decent chunk of RAM to do so.
I completely agree that changing the processor or revising NPU or similar is too much to do late stage, I reject that for increasing RAM or storage, both can be changed closer than 12 months from release and I would also reject that apple had the AI changes planned for much less than 12 months out as well. It just feels like a big fuck you to anybody buying a flagship from apple this year as it wont last the length of time it should do for normal consumers who would expect all of the latest AI features to roll out during the supported window.
With how polished Apples AI on mobile was at launch compared to Gemini on Android at launch were it could not even do basics like timers I suspect Apple had it in the works for far longer and it would not have been a total surprise.
Also you are describing the situation at launch for new hardware, the software will evolve every year going forward and the requirements will likely increase every year. If I am buying a flagship phone right now I want it to last at least 3 years of updates, if not 5 years. The phone has to be able to cope with what is a very basic requirement that is enough RAM.
This isn't some NPU thing, this is just basic common sense that more RAM is better for this, something the flagship iPhones could have benefited from for a while now.
For the base model yeah, but apple loves charging a packet for more memory so I don't see it for the top of the range models. Would be typical for them to only offer 16gb with the increased storage as well, just to bump the price up
If you were being cynical, you could say it was planned obsolescence and that when the new ai feature set rolls out that you have to get the new phone for them.
The problem is it still needs to be 7 races in a row that lando wins and Oscar beats max, not a few. That's a huge ask, especially when the likes of Merc or Ferrari have been stealing wins here and there and it's highly unlikely that Max would win zero races between now and the end of the season.
Constructors should be easy for mclaren as they have two cars that score good points but drivers it's such a gap and max isn't dropping enough points without dnfs and other teams getting between max and lando. There are 8 races left so even allowing only one bad race for lando he needs 10 points more a race, which is max in third, just not been happening enough.
Well it would if it costs them performance and it had to be took off in a hurry, as it takes time to do a work around that doesn't cost performance if it's even possible without major work. Any rapid change like that is hard to deal with.
I can't see max losing the drivers title without the other mclaren and at least a ferrari or merc getting between lando and max for the rest of the season, the gap is still too big. I won't rely on dnfs as red bull just don't suffer from them in large enough numbers since the PU got sorted
The FIA denied that any team was using such a device, it's likely a team asked if such a thing would be legal ahead of fitting it and the FIA decided to make it preemptively and explicitly illegal in the rules.
So I used to be massively into warhammer 30k and 40k, I have over 100k of points of models probably over 200k. I used to have one of the largest book collections going, over £12k worth when I sold it. Yet I dropped out the hobby after several decades because
*My main army is space marines and they started killing them off so that they could reissue the entire range but worse
*They dumbed down the rules progressively more and more
*30k rollout and tournament support just stopped meaning that my huge investment didn't get used anywhere near enough
*models became more monopose
New book releases of the same quality just stopped, because they wouldn't pay to keep the big name authors
Plenty of people like the new direction, I don't as it stole the ground from under me and required I rebuy in for worse.
It really would have to be willful negligence from the designer, the engineer and the insurance company not to have the keel and mast balanced so that if it gets knocked down even to the point the mast touches the water it will self right as long as the boat does not take on water. It's the whole point of a keel on modern sailboats, retracting or not.
On a boat this valuable the insurance company would want underwritten engineer reports about the seaworthiness of the boat and will only insure you for pre agreed areas based on said report. It might not be insured but with a commercial crew that is highly unlikely.
If the keel was up for shallow draft or it fell off, this happened to a number of oyster yachts a while ago so its not that unusual, then they would be fucked. If it took on water in large quantities so that the bilge pumps could not cope, they would be fucked. However it should be unlikely that the windows are open during a storm with commercial crew onboard.
My guess is that the keel either part or all of it came off, that will fuck you even in calm seas.
I would suggest that it was the broad outline of the same ending he planned and shared with DnD just implemented badly. He's probably more pissed that they made his ending so unpopular by completely botching the landing as he now can't use that same ending without risk of rejection. I still maintain it would have sucked as an ending even if it had been implemented at the same standard as series 5, but what we got made it far far worse.
I switched from Pop OS tiling that I had retro bolted onto stock ubuntu to Sway, massive step up and more importantly I get to keep my Ubuntu/Wayland base.
As with most add on WMs I had a bit of a learning curve sorting out the extra bits and pieces that just come stock as part of Ubuntus Gnome implementation such as a launcher (I use dmenu), a menu bar (swaybar for me), and even a lock screen (swayidle). Even doing things like wallpaper needed more effort.
Never tried sharpening them myself, always used a service as standard jobber bits are less than a pound to get done for you. I normally save up a bunch of stuff including saw blades and get them done at once to save on shipping at hit the low volume discounts.
However, its only worth doing on quality components, I wouldn't pay a pound or waste my own time to get a cheap ass drill bit sharpened, I would just replace it.
My saw blades start at like £70 so paying £12 to get it sharpened is good value, but a £30 blade is not really worth it, not least for which it won't cut anywhere near as much material before getting blunt between sharpens. Same logic for drill bills, some of my SDS ones are over £30 each, my augur bits can be over £50 each, so those are worth looking after, not going to bother for a set of 10 bits for £20.