paf @ paf @jlai.lu

Posts

12

Comments

150

Joined

2 yr. ago

Not 100℅ sure...

Your intent script might need to be a bit different using

        speech:
       text:

  

As shown below https://www.home-assistant.io/integrations/intent_script/

           intent_script:
        CustomOutsideHumidity:
          speech:
           text: "It is currently {{ states('sensor.outside_humidity') }} percent humidity outside."

  

Aldo have a look at https://developers.home-assistant.io/docs/voice/intent-recognition/template-sentence-syntax/ for the common.yaml

It is a good voice assistant but it isn't an ai voice assistant, Also only works for your home assistant devices/entities unless you link it to gpt

So pc is consuming 13W, this is with one nvme + one SSD, pic at 30w for a few seconds at boot.

Curious, might have same machine but do consume a bit more, do you have one SSD + one nvme?

It is a beelink mini s12 pro https://www.bee-link.com/beelink-mini-s12-pro-n100-mini-pc-clone-1

Do also have a n100 processor running proxmox with 3 VM. Can't try right now but can come back in a few days to let you know how much power it draws

Not OP but have a question if you don't mind as I just swapped to Klipper and everything isn't clear yet.

When you say "due to lack of power..." isn't klipper doing all the work meaning that board don't need to process anything and is basically in a "reader" state?

Don't have knowledge to answer your question but you could check how home assistant does it, I think that should point you to the right direction.

Exactly, neither fit right for an AI

Can't recall which video (maybe "year of the voice chapter 5") but devs talked about it on official youtube Channel

ZigBee are not designed for high bandwidth applications but +1 for Home assistant

Think it depends the language, in french gpt is very very close to "j'ai pété" which means "I farted". But, yeah agree that Claude ain't much better name

here is my config yaml for climate. added hint for your case but i never had heat pump, does your heat pump only heat or does it also cool? exemple here is ok if only heat. If yours heat/cool, try some of the hacs thermostat addon. A quick search led me to this https://community.home-assistant.io/t/generic-thermostat-switch-between-heating-and-cooling/420053 which point to https://github.com/swingerman/ha-dual-smart-thermostat but i know they are more hacs addon for thermostat, you may need to search which is good for your use if the one above doesn't suit your needs

    
climate:
  - platform: generic_thermostat
    name: Thermostat Chambre (Riscaldamento)
    heater: switch.radiateur_chambre (device to toggle your heat pump)
    target_sensor: sensor.sonde_chambre_temperature (your temp sensor)
    min_temp: 12
    max_temp: 21
    ac_mode: false
    target_temp: 19
    cold_tolerance: 0
    hot_tolerance: 0.1
    min_cycle_duration:
      seconds: 300
    keep_alive:
      minutes: 3
    initial_hvac_mode: "off" (set this to heat if you want it to be active when HA start/reboot)
    away_temp: 12
    precision: 0.1

  

If I recall correctly, chances are they are coming this year

Unless you want some specific schedule, there is no need for automation, add config to yaml and it is good to go

My bad, misread as I understood that you spend last decade fixing each part. As I said ender 3 from something around 2018-2019 were very great for the price but maybe quality has decreased since. Might be better choice today

How did you manage to get an ender 3 10 years ago while they were launch around 2018 😂. Wild guess is that you didn't mount it with care, which often end up with countless issues and blaming printer part is easy. If it was such a bad printer, you would not encounter printers farm using it.

It was definitely not a plug and play printer (they were not any at that time), but you could/can achieve same quality print as a thousand €/$ printer, the worst thing on it was his plastic extruder (10€ and 10 minutes to replace it), and the best thing on it is that you can customise it to your wish unlike any other printer and this was due to the vast amount of people who loved it. I still have an old 3 pro and it is rock solid, I sometimes don't use it for a whole year but each time I plug it back, i only clean and level the bed and it is good to go. (as I have a cr6-se which is also awesome by the way)

That being said, I can't tell how the most recent ender 3 versions does as I have only tried ender 3, 3 pro and 3V2.

Just use generic thermostat https://www.home-assistant.io/integrations/generic_thermostat/

Smart home junkie just made a video about it https://youtu.be/o3yZWD_sFIE

Will try that soon