bluewing @ bluewing @lemm.ee

Posts

3

Comments

1,094

Joined

2 yr. ago

Yep. Piss jugs are a thing for truckers. Ain't got time to stop to pee, you guys all expect your ordered shit to be across country in minutes after the order is placed.

Machines are a means to an end. Not the end in and of itself. It just depends on what YOUR ends turn out to be.

There is nothing wrong with having your printer be the hobby. It''s a valid part of of the printing hobby and the current state of 3D printing wouldn't be it is right now. And Bambu has done nothing new that hobbyists weren't already doing as a hobby to modify their machines. So I wouldn't worry much about what a Bambu owner thinks.

I grew up drinking raw milk because we were milking 50 head of cows every day. Why make a 50 mile round trip to buy something we 500 gallons of right there in the yard. No one died or even got sick from it. Is it better for you? I don't know or care. It's what we had and the price was right. And it's VERY unlikely any of you would actually want to drink it. And this includes the magahats also. It tastes nothing like the stripped down and flash pasteurized milk you are used to.

That said, for the commercial milk you buy and drink, it's an absolute must to pasteurize the milk. It's going to take a week for that milk to get from the dairy to your refrigerator and you expect it last another week or two. And so food safety demands it.

In any case, it's not illegal to drink raw milk. You just can't sell it to other individuals. If you want raw milk all you need do is to simply get your own cow and milk it. Then you can drink it all you want.

I grew up on a dairy farm and milked cows every day. We never bought "store" milk to drink. It always came from the tank every morning. We also made and ate foods that would cause you urbanites blanch and faint if you only knew, (I miss the home made blood sausage and canned beef my Grandmothers made). It's not a death sentence like many of you seem to think. But, for commercial store bought milk, it IS imperative that the milk is pasteurized for consumer safety. That milk might be a week or two old before it reaches your refrigerator in the Big City/Suburbs/Gentrified neighborhood.

I doubt if drinking raw milk will become common place amongst magahats. It tastes NOTHING like what they or you are used to. It's a whole different thing. And the vast majority of you would hate the taste of it and refuse to drink it. And the first time someone gets the shits from drinking it, they will try and sue the dairy they bought the milk from. And that won't end well.

In Europe they seem to not have the same fear/issues with the sale or consumption of "raw dairy" that we do here in the US. Perhaps they are smarter about such things.

I bought a Mini with AMS last month to add along side my old Mk3s+. It's faster, (though not that much faster in the end), and the AMS works very well. And it was easy to setup and get running.

But it has had some basic design issues that need attention, (for which there are community fixes you can find). And even after careful tuning, it really isn't any better than the Mk3s for print quality. It's just easier to print in color if you choose to be wasteful with filament. Like I am doing right now.

Coming from an Ender, it will be an upgrade though. I do think the the A1 series is a good inexpensive home use printer though.

Nice work!

They do have multi-national volunteers fighting right from the beginning. Enough to form a few brigades with them. The difficulty with them is the language barrier. Hard to lay out a battle plan and give orders if you need multiple translators to do it.

Yes there have been entire brigades stood up of British and US volunteers from the beginning. And they still exist today. We just hear as much about them in the news anymore.

Nah, he's more of a Holland&Holland or Boss Double Rifle in .500 Nitro Express kind of guy.

The reverence and fear of cast iron cooking pots and pans is stupid on both sides. People have been using cast iron under every condition from the big fire place in a castle's kitchen to a fire pit in a peasant's hovel to open fires outdoors to Michelin Star restaurants in Paris and London. And they cooked EVERYTHING in it because it's what they had and all they had. There is no mystery to seasoning and care of cast iron. Just like there is little to fear from cooking with it.

Those that do worship in the church of cast iron-- just cook in it. There is nothing sacrosanct about it. If your Great Grandmother didn't worry about it, why should you? Any damage you can do it can be repaired quickly and easily. So get over yourselves.

And those that fear cast iron cookery, get over it.......They are often the same ones that are fearful of micro plastics getting ingested and yet have no care or concern while cooking with plastic cutting boards and utensils in plastic coated cookware.

Lots of ethnic restaurants that the back of the house is staffed by illegal immigrant Hispanics. It seems they can pretty much out cook everyone.

Making bacon.

No, .step file is an exchange format, (think .pdf files), that can be used across different CAD programs to import geometry so you can work on them.

Unlike the common .stl format, a .step file contains a majority of the internal information that was created by original CAD model. While an .stl file is just meshes and nothing else.

PrusaSlicer can use .step files directly to slice. But I'm not sure that other forks/slicers can. I like models in .step file because it's far easier to open them in whatever 3D CAD software I'm using to make changes to a model to suit my needs. I can do .st' files, but it's a pain to work with them.

People who do first layer tests across an entire build plate are being anal retentive. Or they are looking for some kind of bragging rights.

Thanks to the various auto bed leveling systems out there on every printer these days, it means very little to do such extreme tests. And as long as your heat bed is flat enough to be in compensation tolerance for the auto leveling system you are using, you will never notice much.

This is not to say that it can't be a diagnostic tool if you ever need to check for a warped heat bed. But that's pretty rare these days to find a heat bed that's that bad. And if you are running Octoprint, there is a plugin to map the flatness of your build plate that you can see.

*** A word of caution: One needs to understand that the "flatness" of your build plate can and will change at various temps. Just because it might appear flat at one temperature, does not mean it will hold that flatness at a different temperature.

There are a fair number of methods to join pieces into larger assemblies.

Some people have used a 3D pen to "weld" an assembly. But from my observation, it's not particularly strong. Super glues are popular for PLA. It bonds and holds well to PLA. PETG is better glued with epoxies vs super glues. But super glue will work in a pinch. Sometimes printing threaded parts is acceptable. But issues with fitment and strength of threads can be a problem. Simple machine screws and nuts are good for somethings. Even self-tapping screws are popular. Heat set brass threaded inserts are cheaply and widely available. And can be set with a cheap soldering iron. Various "snap together couplers" can be designed and 3D printed.

These are just a few ways to make assemblies with 3D printed parts. The trick is to learn how to choose what is the best for any particular model and that's on you.

Making a model hold water can be as simple as "the thicker is better" approach by adding more perimeters and top and bottom layers. Or it can involve applying various suitable paints and sealers. Again like fasteners, your use will most likely dictate the methods that you choose.

Edit to add: From what I can see, PrusaSlicer currently offers the best tools to create cuts and locators right in the slicer. With perhaps Cura a close second, (but I haven't use Cura in couple of years now).

One thing that people neglect to mention when they debate "Bambu vs Prusa" is the level of support. And support costs money. Prusa's level of support is why I chose their brand over other far more expensive printers I was looking at the time. That support level matters to a business. And they are willing to pay for it. So Prusa is well situated to enter the commercial market as a known name.

Violence is always a valid answer. It's just not always the best answer. The problem with violence is it's been proven time and time again to be impossible to control and hold to a limited use since there are no cool heads at that point. Nor do specific targets exist-- just collateral damage.

And no successful revolutionary has ever had a sound plan for after the victory beyond "I want the power now." And they can either hold the power or not. But the idea of "for the good of the people" gets put to the side pretty quickly.

The issue I have is not that " You don't need to reply." I don't if I don't care about you and your ignorance. Experience will teach you soon enough. But I have more than once provided detailed answers on subjects that I'm well versed and experienced in. Only to be insulted because the answer I provided didn't fit what the person wanted to hear.

And when that answer pertains to a life threat level activity, then I can't help you if you reject the answer. So hey if you choose to put an unknown 200+ year old pipe bomb next to your head and pull the trigger, then Ok it's not my accident scene. And I'm no longer concerned if you live through the experience or not.

Oh god, I thought a wooden stake had been driven through Jeeve's heart...

Yep, just like Kleenex, or Xerox, (a faded term for mimeograph/photocopy), Google has become a generic verb/term for search in virtually every language now. To google something is synonymous with search. It no longer implies a specific search engine. (I use Ghostery private search myself). Google has lost the war on their name and "It's a Good Thing^tm"

But there does seem to be a greater amount of "search entitlement" these days for even the easiest of problems. People as a very general rule don't seem to want to be bothered by the need to learn things on their own. They expect others to provide them all the answers in an effortless format.

I've even provided detailed answers to people on some 'life threat level' activities that were rejected because I didn't simply reaffirm their ignorant and misguided thoughts in looking for shortcut answers.