beastlykings @ beastlykings @sh.itjust.works

Posts

12

Comments

371

Joined

2 yr. ago

Thanks!

Hmmm that sounds like it might have been deoxit. It's worth trying again, but it can only do so much, eventually the resistive track just wears away.

If you need to solder in replacements, I wrote up a short starter suggestion comment elsewhere in this thread.

Glad I could help! It's a skill to learn like anything else, but once you get the hang of it, it's super easy 👍👍

I have a 600w ham radio amplifier from the 60s. It's a Heathkit SB-200

I'm very proud of it because I bought it in rough condition, and repaired it myself. Replaced all the leaky capacitors and did some other work in there. Now it runs like a dream! It was my first time working with tube gear. The voltages in these things is 2500 volts, that'll kill you dead before you know what happened.

I also have an SB-220 that I got broken. I fixed it up but didn't do a full rebuild on it. It'll do 1200 watts, but I don't need that much power so I haven't used it much. It's in storage. That one is from the late 60s early 70s.

My next oldest device is also ham radio gear, a Kenwood TS-530S from the 80s. There's a lot of solid state stuff inside, plenty of transistors doing all the work. But the final output stage is still a good ole pair of tubes. I bought this in non working condition, and fixed it myself as well. Good fun!

I have a 2600 that needs the same treatment, haven't gotten to it

Did you try cleaning them with deoxit? That stuff works wonders on crunchy pots. Might be an easy fix!

Open it up and see if any of the capacitors are leaking! Soldering is a great skill to learn and you can fix it yourself.

The biggest problem people have is buying a bad soldering iron that gets way too hot. You can get an excellent iron for only 10 or 20 dollars more than the garbage out there. I used to recommend the TS-100, because that's what I use and love, and they used to be way cheaper. The TS-80 was an upgrade to that, which was also nice but I never liked. If you've got the money, I still recommend them. However for the budget minded, the pinecil is almost the exact same thing, it's well made, and it's still like $30-40 bucks. In fact some people prefer it over the others. You can power it with a beefy USB-C charger if you have one, or an old laptop charger if you want to cut up the end and put a barrel jack on it. The thing pulls about 90 watts at full tilt, but only for brief periods.

Next you want to buy yourself some practice boards, you can get soldering kits from AliExpress that will let you build little flashing trees and hearts and stuff. Or even small handheld games if you're getting better at soldering.

Then you watch YouTube tutorials, find several. You want to focus on quick work, at low ish temps like 280C, keep the tip clean, and flux is your friend. The very tippy tip of your iron should always be shiny, if it starts turning black, it's building oxides from being too hot and not enough flux. Clean that thing with flux. If you leave it that way too long you'll ruin it, that's why most people struggle to solder.

Then once you've learned, and you're ready to go. Watch YouTube videos on fixing the Xbox, buy the caps, crack that thing open and have fun. Caps aren't that hard to replace, compared to other soldering projects. You'll do fine 👍

Not that it does you much good now, but you might've had a bad fan. My unit is a preorder one, and the fan wasn't broken, but it was just... Noticable, when it was on. It wasn't enough for me to say it was broken or anything, but I could just tell when it was running, especially at full speed.

It didn't bother me, because I was like wow this game is really pushing the Deck hard, I can really hear the fan. Etc etc.

Well after a few months of hard use the fan developed a click, it was a bad bearing or something. You could make it go away by tapping it.

Anywho to make a long story short, after getting a replacement that was DOA, and then getting a second replacement. The new fan was noticeably quiet. So quiet that I thought I had another DOA. But no, it was working perfectly. I just didn't realize how bad the original fan was.

So now I have a very quiet Deck, and I'm quite happy about it 😁

I have friends that do the same thing. It's terrible. We were watching a movie I had already seen last night, and someone wanted the subs on. I couldn't focus on the movie and I ended up playing on my phone. The subs kill me.

Ham here too, what practical uses have you found? Mine is sitting in a box, I got it almost a year ago and haven't checked the latest firmware or apps in almost that long.

We use our breville for hot water too

I did this last month in my 04 Honda CRV, such a massive upgrade. I don't have steering wheel controls, and I didn't want to tap a screen for volume control, so I went with the boss be7acp because it has a physical volume knob. Added a backup camera because why not.

It's been a massive upgrade! Crutchfield is the bomb, installation wasn't that hard, a bit fiddly getting to the wires for the backup and park, but I was done in a couple hours, backup camera included.

I don't have any background knowledge to confirm this, but this seems like the extremely likely answer. Unfortunately.

This for me, the only success I've had is with network issues.

It's funny because I was at a point where I wasn't playing games at all really, not on my big PC, phone, or anywhere.

I had pre-ordered the steam deck for my wife, and she used it a bit but when TotK came out that took all her attention playing on switch.

I had poked around on the deck, played a few games, but didn't love using a controller instead of mouse and keyboard.

Then we had a gig where we had to sit in a car for 8 hours, and she convinced me to try playing horizon ZD. I had never played it, but I ended up really liking it. And the convenience of having it on the deck was great! I ended up playing it all the time, and beating it, and now I'm emulating BotW, playing it for the first time, and enjoying it.

Now I've gone full crazy, I'm emulating a couple dozen games, got a bunch of others installed and waiting. I upgraded my SSD to 2tb, replaced my fan, and am eyeballing that clear back with RGB.

My advice, if you can afford it, get it and just see what you think. You might like it!

Or, if you don't like it, you can resell it. The value of these things seems to stay reasonably high. Though I imagine we might see a drop in price with the flood of LCD models about to hit the market.

Cool!

Can you put the listener count on the page? I was curious earlier as to how many were listening but couldn't find it

ITT a ton of people not reading the OP 🤦‍♂️

So frustrating at times! Some of the harder puzzles are ridiculously convoluted

Woo!