The Pantser @ ThePantser @lemmy.world

Posts

6

Comments

1,365

Joined

2 yr. ago

under the rubber mat of the "map pocket" in the doors

That sounds like a real shit place to try finding in a smoke and fire filled car. That thing needs a recall and crushed into cybercubes.

So do something about it. Like providing nutritious foods for free to those in need.

No, don't interpret the Pubelicans words. They mean exactly what they say. There is no hidden meaning or "what he really means". For years the news and media did the "what he probably means" with Trump and it was not true, he literally meant what he said. Don't do that for this piece of shit, if he can't speak clearly and truthfully then he's unfit for his position. We as a people should not have to read between the lines.

Sounds like a thermal runaway where a temperature changed too quickly and the code interpreted that as a fire or risk of fire and shut down. A lot of times that can be helped with a silicone sock and a PID tuning. Another thing is the ceramic heater core is going bad and it can't keep a stable temp above a point. Heater cores are cheap and easy to change. The heater core is considered a consumable part and usually comes in multiple packs.

Might wanna switch that F to a C.

So they finally got all that sweet user location data they needed to create whatever their ultimate goal was. Probably some kind of population density map for military purposes.

Use the billions FElon saved! You don't need funding.

I brows Lemmy by all and then I filter out the communities I don't want to see. This lets me see the new communities that pop up and decided if I want to sub to them. I have around 300 blocked.

Maybe even suspicious

There goes the last 24 hour pharmacy in my city. The hospital doesn't even have a 24 hour pharmacy. What's the point of having 24 hour urgent care if I can't get a script filled.

Other countries should put trump, JD, and felon on a travel ban. That will really get under their skin especially if they have businesses there.

PETG is picky about layer heights and speed.

Thick and slow for PETG. I usually double my layer height vs what I would print in PLA. With my .6 nozzle I print with .3 layer and cut my speed down to 50% for the first layer. Since you said it happens mid print you might be printing too fast for the first few layers and it is getting too high because the layer is not cooling enough and it starts curling. You can also try reducing flow if your nozzle is worn and it's allowing more plastic than the sclicer expects which will cause too high layers and scraping.

Oh and it sounds like it's too hot too. 80° bed in a enclosure could cause the chamber to get too hot and not allow the layers to cool fast enough and so you will see curling while printing. Lower the bed to 40-50 and monitor chamber temps. Maybe open the doors a crack. You only need an enclosure for PETG if the room is drafty.

Equal opportunity employer?

All federal agencies are covered by the laws enforced by EEOC.

The U.S. Equal Employment Opportunity Commission enforces Federal laws prohibiting employment discrimination. These laws protect employees and job applicants against employment discrimination when it involves:

• Unfair treatment because of race, color, religion, sex (including pregnancy, transgender status, and sexual orientation), national origin, age (40 or older), disability or genetic information.
• Harassment by managers, co-workers, or others in the workplace, because of race, color, religion, sex (including pregnancy), national origin, age (40 or older), disability or genetic information.
• Denial of a reasonable workplace accommodation that the employee needs because of religious beliefs, disability, or pregnancy, childbirth, or related medical conditions.
• Retaliation because the employee complained about job discrimination, or assisted with a job discrimination investigation or lawsuit.

The image would make a great clock face with the hand as the hour. Oh look it's about Nein O'clock. And by great clock I mean really fucking stupid

That's 2 heading cards, one is set as the title and the other as subtitle. The title has the navigation option turned on to navigate to that room. And the subtitle is just filled with entities. I then use a entities card set with just the divider. It's a messy way to do it but it was the best I could figure.

I buy a 5 gallon bucket of honey once every 6ish years. It's one of the only sweeteners my wife can have so we use it in everything that needs a sweeter taste. I fill small 20oz jars with it and seal the bucket back up. It's a good investment because you can get it much much cheaper. I buy mine from Sleeping bear farms in Michigan.

Just to give an idea what I use it for based on my Home Dashboard

Office is under remodel which is why the sensors are offline.

Been using it for awhile now. Do we have a way to use our phones as the play yet? I want to be able to listen on my phone with headphones or even in my car with Android Auto. I would love to be able to delete my Spotify app. I still use the service because the radio feature is still much better than MA. But once I can do everything that Spotify can be I can cancel my Spotify account.

Shop at Aldi if you have one locally or Costco.

Aldi is not US based and Costco has been the least evil of the big chains. But definitely Aldi first.

Anyone near there wanna go chain yourself to it?