Marvelicious @ Marvelicious @fedia.io

Posts

2

Comments

47

Joined

2 yr. ago

Meh, I don't think they're quite foolish enough to go full Juicero, but I won't be updating my firmware.

🤣 That would be absolutely PERFECT.

🤣 "Everyone uses this thing... it must be possible to monetize that somehow!"

I'd really like to hear their "underpants gnome" business plan for how that's going to work.

Nope, you're missing the point entirely. There's absolutely nothing stopping me from walking into the other room, tearing apart my X1C and rebuilding it with, let's say a klipper board, except that it works quite well at the moment... No printer bought right now is likely to be any different in that respect. You're trying to act like it's an i-phone, but it just isn't.

Ten years... Someone apparently thinks they're funny. I'd like to see their ten year old 3d printer that is still essentially using stock or equivalent components and hasn't been essentially re-engineered from the ground up. Are you enjoying manually leveling that bed with thumbscrews and a scrap of paper? Still printing on tape, or maybe a piece of glass? This whole hobby is still moving relatively quickly and I wouldn't be surprised to wind up working with additional axes or other unpredictable innovations ten years from now. Certainly we'll have gone through multiple "ultimate" build surfaces by then.

Me too.

It has definitely come a long way from my first attempt with it. It's really usable now and I suspect it will only get better with a larger user base.

There are already several aftermarket suppliers making parts for them, including a drop-in e3d hot end. Look, I generally prefer open source designs, but the hassle-free workflow with an X1C has been worth it.

Also, they sold a PILE of these things, I suspect aftermarket support will continue even if Bambu stops.

"Double shot of espresso with a side of racism please..."

I mean, it's impressively ornate and academically fascinating, but also absolutely horrifying.

I pop my PEI bed with finished print into the freezer for about 5 minutes. Pops right off, every time. No tape, no glue, I just wash the bed with soapy water between prints.

I got busy with other things and forgot to order.🤷🏼‍♂️ Watching the video right now, just out of curiosity. I'm just happy to see decaf being taken seriously. I often would love a cup of coffee after dinner without spoiling my night's sleep.

Looks interesting. My primary focus is on engineering materials, but I'd love a truly biodegradable draft filament and I'm willing to put in a bit of time working out how to make it work with my equipment. Looking at Colorfabb's site, it appears they only sell it in 750g spools which is incredibly frustrating considering my intended use. For a draft filament, the bigger the roll, the better!

i recently got back into printing. I had some PLA, some PETG, some ABS and some ASA all of which had sat for longer than that. After thorough drying in a dehydrator, a couple of rolls just didn't cooperate but most did. The troublesome ones may not have been very good to start - unbranded mystery stuff.

That is spot-on what works for me. Warm soapy water has given me the best results with a PEI plate. The chamber heat soak is also big for these troublesome filaments. My printing gear lives in a closet and for trouble prints, I will crank up the bed, and my filament dryer for a half-hour or so to get reliable chamber temps.

I've pretty much been running on the binary theory with the AMS sensor: anything but a 1 is too high. I guess I'm glad I didn't waste any money on those digital jobbies. I wonder if the old school analog style are better?

I feel like it's finally at the point where the issues are minor enough that I have the patience to deal with them. I've been using the release candidates for the last couple of weeks and mostly it comes down to remembering to save regularly and occasionally having to shut it down and restart. Honestly, some of the commercial solutions aren't drastically better in that respect!

I think anyone coming from a place where they have a ton of experience in SolidWorks or Fusion might want to hold out a little longer, though it's definitely worth a try. If you're coming from a place where you have to learn a new program anyway, you might as well learn the free option that will only continue to improve.

MangoJellySolutions on YouTube is really good.

This is a very good joke and deserves more upvotes, but I only have one to give.

I think my experience is roughly parallel to yours. I bit the bullet and got an X1C and with a couple of exceptions (mostly my own mistakes) it has been largely hassle-free. Having a reliable printer is actually allowing me to tackle the project of rebuilding my Anycubic Predator into the machine I always wished it was. That massive build volume will be great, but I have something I don't have to fiddle with to make the parts.

As for the Bambu/Chinese paranoia, I think it's overstated considering most people here are probably typing their replies on a device thoroughly infiltrated by Apple or Google or both. Do a few prints to make sure everything works properly and switch to Orca Slicer and local network mode if you're concerned.

YM (and your fear of China) MV

Orca and local network mode work pretty well for me.🤷🏼‍♂️