Fosheze @ Fosheze @lemmy.world

Posts

32

Comments

641

Joined

2 yr. ago

You need some sort of licensing to do most HVAC work anyways. Theres no point in forcing companies to make all the parts available to the average joe when the average joe can't legally do the work anyways.

You would think that but where I work we are still manufacturing NEW equipment with GPIB. Industry moves at a glacial pace and plenty of compainies will still pay to have GPIB as an option.

Honestly, they probably will. John Deere is really shitty ethically speaking with their stance on right to repair but they have a very strict supplier code of conduct. I used to work for a place that was one of their suppliers and our contract with them was far more strict than with any of our other customers. It mostly included things focused on employee welfare at the suppliers site. I'm going to see if I can get a hold of it today but posting it would probably violate confidentiality and this is an easily doxable account so don't expect me to post it wholesale.

Also this place just got a bunch of bad press while being associated with Deere while Deere currently has enough bad press of their own. They're going to come down on them hard which almost certainly means just cutting them off because it isn't like a company as big as Deere is going to struggle to find eager suppliers.

That would be awesome. Maytch you with someone on all the same watchlists.

Those areas are not at all equivalent. Florida gets flattened by hurricanes every year. California is on fire every year. Other areas get disasters but not with nearly the same frequency.

Once you get a bit farther north than Florida huricanes are not an every year thing. Sure they still happen but not with nearly the frequency that they do along the gulf coast. The midwest gets tornados but outside of tornado alley they are a rare thing. Even in the areas where they are frequent the damage tends to be more localized when they hit than with huricanes or wild fires. As far as rivers go, they do flood but that is something that can be controlled. As someone who has lived along the coast of the Mississippi for their entire life I am very aware of all of the flood prevention work the army core of engineers has put into the area and it all works. Sure it's still a risk if there is a dam failure or an especially heavy storm but that is a once every 50 year thing not a literally every year thing. If you are living in an area that floods every year and that risk can't be mitigated then, yes, you should stop living there.

Not south korean but for me marriage just seems weird. Why should the government be involved at all in my relationship? Why would I do a bunch of paperwork and pay money to get a document that offers very few benefits and could one day become a pain in the ass if my partner and I grow apart for some reason?

If a partner cares about marriage there is nothing keeping me from swapping rings with them and doing a ceremony but I see no reason to get the government involved.

Not really. The correct way to dispose of asbestos is literally to put it in a garbage bag and send it to the dump. As far as a hazardous material it's only really bad for people. It's almost entirely chemically inert so it's actually far less bad for the environment than most of the stuff that winds up in the dump. Even ocasional exposure wont do anything to most people (not that it's good for you of course). It's mainly an issue if you work in an industry where you handle it every day.

I had to do some asbestos remediation in my house a while back (removing plaster filled with it) and I contacted the county about proper disposal. They literally just told me to bag it and huck it in a dumpster.

I'm not saying we played fast and loose with the spec. I'm saying that there are plenty of places where the actual spec doesn't use numbers and it is a judgement call for example minimum lead protrusion.

There are also plenty of places where a number is given but it is not possible to measure such as barrel fill on through hole components. In those situations an inspectors best bet is to eyeball it and if it's even questionable to rework and correct the process so it isn't. You don't eyeball it when it's close, but you also don't need to measure, for example, lead protrusion on every lead when they all apear to be definitely under 1.5mm.

distribute the emotional load across multiple interpersonal relationships

Yall expect me to have multiple interpersonal relationships? In this economy?

Weve got it at basically every kwiktrip in MN but thats probably because it's commonly used in seasonal vehicles (ATVs, Boats, Snowmobiles, etc.)

Fir is used in the US (most commonly in the pacific northwest), it's just typically used for outdoor construction because it doesn't warp as easily and holds up far better outdoors than pine. So you will frequently see it used as decking, fences, or siding (although wood siding is getting pretty uncommon).

Fir is also sometimes used for framing like pine is but pine is usually cheaper. The only advantage fir has over pine for framing is that it tends to be a bit stronger. But there are very few places where you need that extra material strength and can't just use slightly more reinforced pine construction to acheive the same result.

I can't speak for everyone but I've spent my entire life masking my depression so I've gotten pretty good at masking in general. It's just practice.

Your recorded voice actually sounds really similar to mine and I think it sounds fine. I think the main issue is probably just that you could have a better mic setup. A good sound setup makes a world of difference over even a decent one. Like I said, your voice isn't bad at all but there's a reason pros spend all sorts of money on expensive setups.

If your voice is something you're uncomfortable with you can also train it on your own. Even people with naturally amazing voices often do vocal exercises of some sort.

Hey, save some representation for us ace folks. Not every show/movie needs to have the main character smashing pissers with someone. Let close queer platonic friends just be what they are.

Once again this is a question of tolerance. It could be a place you only care about minimum clearance. If the spec is for a gap of at least 15 mil then a pack of 30 mil key cards makes for a bunch of cheap easily replacable go/nogo gauges with enough leway that even a worn one won't put you under spec.

I'm most familiar with IPC standards for electronics but even in the most critical class 3 applications there are plenty of spots where the standards are effectively gauged by eyeball let alone with even a makeshift tool because those specific specs aren't that critical for the application.

Soap is bad if you need to keep something lubricated but it works pretty well is you just need to lube something up a bit for installation because you can just hose it off afterwords. As far as the keycards go, that depends on the tolerance. If that tolerance is generous enough then an actual feeler gauge is overkill. A pack of keycards is dirt cheap and are all going to be about the same thickness. When one gets busted or worn then you can just grab a new one from the pack. Verses having a production guy break a feeler gauge and start guestamating because they don't want to tell the boss they broke the third one this week.

I can't know for certain what is specifically going on there but I do work in contract manufacturing for high end scientific equipment and critical medical electronics so I do know a fair bit about the processes used. For me the dishsoap and keycards on their own don't raise any alarms. It sounds like the main issue is poorly written incomplete manufacturing instructions, which is a big enough issue on it's own and is an absolute monster to try and fix once your production workers have gotten used to working like that.

the soap should either be specified by brand in the manual or swapped to a certified lubecricant, that has been tested to work fully with the gasket and not cause deteriation or on any way affect the quallity of the seal.

1. The seals used are most likely silicone (it's what we use on environmental chamber doors). If so there are very few chemicals that will harm them let alone dishsoap. We actually use 409 (a bathroom cleaner) spray to lubricate our seals where I work.
2. The dishsoap is almost certainly something they order and stock with their own internal shop supply number. The instructions most likely reference that number but that number would be meaningless to anyone else so the news article just said dawn dishsoap. It's not going to be any random dishsoap because that's not how industrial supply works. It would be more expensive for them to go pick up random dishsoap than to just keep ordering the same part number (that specific dawn dishsoap) in bulk from their industrial supplier.

The keycard should be replaces with a go/nogo custom card

Why in the world would you make custom tooling when there is a readily available off the shelf solution? You can just buy packs of keycards for dirt cheap and they are going to be a known thickness because they need to be to keep working in the same keycard slots. That thickness should be documented somewhere but it isn't going to be in the manufacturing instructions because the production people don't need it; they just need to know that the go/nogo gauge (the keycard) should fit. The more extraneous information you include on manufacturing instructions the greater the chance you have of someone missing or misreading something. If someone needs that extraneous info or something on the production floor isn't right that's when you bring in the engineer or process support staff who will have access to that info and the authority to make decisions based on it. If your production staff are making critical decisions on their own then something is very wrong with your manufacturing instructions (which sounds like the real problem here).

It's BS but it's still better than renting. With house prices currently bloating like a roadside racoon corpse you can also get rid of it pretty quick.

Liftoff has been abandoned since August and it is now incompatible with the new Lemmy version. At this point it is dead

There is a federal first time home buyer program even for non military members. You can put basically 0% down on your first house. You just also have to pay PMI until you have 20% equity in your home. So you are better off making as large of a down payment as you can but it can be as low as 0%. Of course there's still closing costs but that doesn't cost too much more than most rentals charge for a security deposit anyways. As far as PMI goes it isn't that expensive. With the PMI, taxes, and insurance included my mortgage payment on a 3 bedroom house is still less than rent on a 1 bedroom apartment in my area.