CalcProgrammer1 @ CalcProgrammer1 @lemmy.ml

Software Engineer, Linux Enthusiast, OpenRGB Developer, and Gamer

---

Read more

Posts

0

Comments

452

Joined

4 yr. ago

The AMD radv driver is best for gaming at the moment IMO. If you're stuck with NVIDIA hardware then yes, the proprietary driver is the best for gaming as the open source driver is quite slow, but the good news is that this is rapidly changing after being stagnant for 5+ years. NVK is the new open source NVIDIA Vulkan driver in Mesa and it just recently left experimental to be included officially in the next Mesa release. Also, NVIDIA's GSP firmware changes mean that the open source nouveau kernel driver can finally reclock NVIDIA GPUs to high performance clocks/power states thus it could achieve performance parity with the proprietary driver with enough optimization. On my RTX 3070 laptop it is still significantly slower and some games don't work yet, but there is no flickering or tearing that I experience with the proprietary driver. Unfortunately for GTX 10 series users, these cards do not use GSP firmware and have no means of reclocking still so they will be stuck using only proprietary drivers for the forseeable future.

I'm happy with my Ender 3 Pro. I paid $200 but you can get it cheaper. I think there is a coupon sometimes for $100 at Micro Center. It's common enough that replacement parts and upgrades (both printed and purchased) are readily available. Runs open source Marlin firmware and the design itself is also open source. Print quality is good for the price. For the price I'm OK with it not having direct extruder or dual Z axis, and adding auto bed leveling is easy enough with a BLTouch or CRTouch.

I'm not sure. I don't know how or when DSC gets used. My new monitor is a 4K 144Hz display connected over DisplayPort and my GPU is a Radeon RX 7800XT. I don't think DSC is being used in this setup but I don't know for sure. I also used this display with an Arc A770 and GNOME VRR worked just fine there too, though I had to comment out a line in a udev rule that excluded VRR support on Intel GPUs for some reason.

I just set up a bedroom "TV" which is just an old monitor and Raspberry Pi. I installed Kodi and some addons for TV sources. Works OK, just wish there was an easy way to turn the monitor off from the Pi on command so I don't have to walk over to it and shut it off manually.

VRR has landed!!!!!!!!

Can't wait to try out the official version of GNOME VRR after using the patched mutter-vrr for several years now. It's a very solid VRR implementation and I feel it's better than KDE's. It's about time it made it into an actual GNOME release. Just wish they would've fully committed and added the VRR toggle in settings rather than hide it behind an experimental flag. Hopefully GNOME 47 moves it out of experimental.

1440p is the perfect laptop resolution IMO. Significantly more real estate than 1080p without being high enough to require scaling. I have a 4K 17" laptop and 100% scaling is unusable there, but yet I have 1440p 13" and 14" laptops and can read 100% scaled text fine.

I also just got a 32" 4K monitor for my desktop and 100% scaling is fine on it. I have an older 28" 4K and 100% is readable but maybe a bit small.

Both sides suck here but I have to side with Reddit over patent trolls. Nokia, what a disgrace you are these days if you have to resort to patent trolling. You used to be cool. That said, if this hurts Reddit's IPO then I'll be happy anyways.

100% scaling on 14" 1440p looks fine to me. More screen real estate the better.

I mostly use Linux but have a Mac Mini as a TV PC. I use the same browser everywhere - LibreWolf. It's Firefox but with Mozilla's bullshit adware/sponsored garbage removed and some extra privacy-focused features/default settings. Firefox has become adware itself, with its home page having sponsored garbage and suggested stories from partners. I generally love what Mozilla is doing and we need competition in the browser space, but I don't want Mozilla spamming up my homepage with their "suggestions".

Not on my 1080Ti. I have serious flickering on certain apps when using the latest NVIDIA proprietary drivers on Arch Linux with GNOME Wayland. Steam flickers and sometimes seems to fail to redraw properly. Had some issues on Discord as well.

I really got into the Internet in the mid-00's and I would say the early days of YouTube, Digg, and most things still being pre-social media with forums being widespread was my favorite era. However, my second favorite era is going on right now. I always wished open source services would be more popular and even back then there were issues with corporate controlled services screwing over their users (see the Digg Migration). I'm so glad to see the Fediverse finally taking off, with self hosting options and no centralized entity who can shut the whole thing down at the flick of a switch. Leaving Twitter and Reddit behind has been very refreshing.

I am not in love with the idea of pure hydrogen cars due to the inefficiencies involved, but I can see a hydrogen/BEV plug in hybrid being a good option if hydrogen infrastructure gets built out. As is, I drive a Chevy Volt, and while its battery range is low it is enough for the majority of my daily driving. The biggest downside of pure EVs is charging time when you're driving on long trips, and in my Volt I don't have to worry about that as I can just fill up with gas. Well, do the same thing but with hydrogen rather than gasoline and you have a car that can refill quickly like a gas car but can be powered entirely from renewable energy sources like a pure BEV. You need some lithium but less than you would for a full size battery. You still have the capability to charge at home and assuming the battery can do a reliable 50 miles or so you would only need hydrogen for longer trips. You could leave the hydrogen tank empty to avoid leakage and safety issues when you aren't doing a road trip. Also, hydrogen cars are EVs anyways so the drivetrain doesn't need the extra complexity of a conventional hybrid, just switch power between the battery and hydrogeb fuel cell.

If their birthday is really % 80 then they reset to a newborn after age 79.

Awesome news! I've been testing it on my RTX 3070 laptop for a month or two now and most games seem to work with it now, but performance is quite lacking vs. the proprietary driver. However, the proprietary driver is borderline unusable in a lot of games even though it pumps out high frame rates because something weird happens with render offloading and I end up with really bad frame tearing and out-of-order frame pacing that makes stuff jitter around. GNOME Wayland with mutter-vrr, AMD Ryzen 5900HX with integrated graphics powering the laptop's 165Hz VRR panel. With NVK, there is zero tearing or weird display pacing and VRR seems to be working so once the performance is better it would hopefully make gaming on my laptop viable in Linux. Tired of having to game in Windows on that PC when all my other systems I can game just fine in Linux.

Cloud gaming is a plague. More fuel for the "you will own nothing and be happy" camp. Let it die. GeForce Now was at least one of the better options since you just use their servers to play games from your owned library, but the whole concept is a plague nonetheless. Let streaming nonsense die. Streaming from your own PC is the only streaming solution that doesn't exist to weaken consumer ownership of their gaming experience.

Any dock that lists Steam Deck support and has the ports you want should be fine honestly. USB C docks are very standardized, so as long as it supports 45W charging or more it'll almost certainly be fine. I have a bunch of different docks and they all work fine with the Deck. The OLED model doesn't change this either, any dock that works with the original should work with the OLED.

I had this issue using the libre modem firmware on both phones. I'm not sure if it's a modem side issue or a Linux side issue. I haven't used either PinePhone with a SIM card in almost a year though so my knowledge could be outdated.

I want to do a follow up eventually. I have some free time next week, might try to finish up the keycaps. I have the standard size cap that most of the keys use done and a spacebar that is the right shape and size, just needs attachment points for the stabilizer.

I had call drops on both the original and the Pro. They both use the same USB-attached modem and the modem has (had?) an issue where it would lose USB connection to the main processor sometimes, so you would just randomly lose cell connectivity. Sometimes the USB connection would restart right away and sometimes it would not and you'd have to restart eg25 manager to reboot the modem.

Not really, it's been a hassle to get them consistent enough to match the default ones. The small scale makes printing them difficult even after I got a resin printer for the project. I settled on a two piece design that works pretty well but the resin material is not as smooth as the injection molded stock caps.